Table of Contents
Advertisement
NetVanta 3000 Series Hardware Installation Guide
Network Interface Modules and Dial Backup Interface Modules Supported
The NetVanta 3205 supports a variety of interchangeable NIMs and DIMs. The NIMs available for the
NetVanta 3205 (AC or DC powered) provide a variety of WAN connectivity options including the
following:
•
56K/64K (DDS)
•
T1/FT1
•
T1/FT1 + DSX-1
•
Dual T1
•
T1/FT1 NEBS (NetVanta 3205 DC only)
•
E1/FE1
•
E1/FE1 + G.703
•
Serial (V.35/X.21/EIA 530)
•
SHDSL, Annex A and Annex B
•
ADSL, Annex A and Annex B
•
3G CDMA, 1xRTT, 1xEV-DO Revision 0, 1xEV-DO Revision A (third generation product only)
•
USB WWAN (third generation product only)
If needed, an analog modem, ISDN BRI U, or ISDN BRI S/T DIM can plug onto the NIM, providing dial
backup capability. Refer to
details.
Refer to
Installing the 3G CDMA NIM Antennas on page 90
on the 3G CDMA NIM.
Refer to
Using a USB Cellular Modem with the NetVanta USB WWAN NIM on page 93
installing and removing a USB cellular modem from the USB WWAN NIM.
NetVanta 3205 Shipping Contents
Each NetVanta 3205 unit is shipped in its own cardboard shipping carton. Open each carton carefully, and
avoid deep penetration into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in
transit, immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the
Warranty, Repair, and Return section of the Support page on the ADTRAN website at
http://www.adtran.com/support).
Shipments of the NetVanta 3205 (AC) include the following items:
•
NetVanta 3205 (AC) base unit with attached mounting ears/screws
•
AOS documentation bundle
•
Detachable AC power cord
61200860L1-34AA
Installing Dial Backup and Network Interface Modules on page 87
Copyright © 2010 ADTRAN, Inc.
for details regarding the antenna installation
Physical Descriptions
for more
for details on
29
Hide quick links:
Advertisement
Table of Contents
