Netvanta 4660/5660 Series Front Panel Design; Figure 1. Netvanta 4660/5660 Series Front Panel Layout - ADTRAN NetVanta 4660 Hardware Installation Manual

NetVanta 4660/5660 Series
NetVanta 4660/5660 Series Domestic Shipping Contents
Domestic shipments of the NetVanta 4660/5660 Series include the following items:
• NetVanta 4660/5660 base unit
• Set of two 19-inch rack mounting brackets
• Set of 4 rubber mounting feet
• Six mounting screws
• Quick start guide
NetVanta 4660/5660 Series International Shipping Contents
International shipments of the NetVanta 4660/5660 Series include the following items:
• NetVanta 4660/5660 base unit
• Set of two ETSI/23-inch rack mounting brackets
• Set of 4 rubber mounting feet
• Six mounting screws
• Quick start guide

NetVanta 4660/5660 Series Front Panel Design

The NetVanta 4660/5660 Series front panel is shown below along with a description of all connectors and
interfaces.
NetVanta 4660
STAT FAN
1 PPS
GIG 0/1 GIG 0/2
OUT
CONSOLE
48VDC

Figure 1. NetVanta 4660/5660 Series Front Panel Layout

Power Connector
The power connector, labeled
Supplying Power to the Unit on page 33
Status LEDs
The LED indicates the unit's status. The
STAT
through LEDs reflect the status of the 10/100/1000Base-T Ethernet interfaces. See the
GIG 0/5
on page 18 for LED behaviors.
CONSOLE Interface
The interface is an EIA-232 serial port (DCE), which provides for local management and
CONSOLE
configuration (via a DB-9 female connector). See
pinouts.
Connection directly to an external modem requires a cross-over cable.
10/100/1000Base-T Ethernet Interfaces
The port consists of one SFP slot for connectivity over fiber. The status LED is located above
GIG 0/1
the interface.
617004660F1-34A
GIG 0/3 GIG 0/4 GIG 0/5
, provides connection for a 48 VDC power source. Please refer to
48VDC
for connection details.
FAN
Table A-1 on page 35
Copyright © 2014 ADTRAN, Inc.
T4
LED reflects the status of the fan. The
for the
Physical Description
GIG 0/1
Table 1
interface
CONSOLE
17