Performing Troubleshooting and Diagnostic Tests 7-15
3. Start the diagnostic program on the echo server.
The diagnostic program that you use depends upon the
adapter board that is installed in the echo server.
After the system prompt of the drive containing the
Configuration and Diagnostic Program, enter the name
of the appropriate program from the following list:
Diagnostic
Program Name
3C503
3C505
3C507
3C5X9CFG
3C523
3C523TP
3C527
The diagnostic programs listed above come on the
EtherDisk diskette that accompanied the adapter.
4. From the main menu, select Echo Server Setup.
The program notifies you that your computer is now
set up as an echo server.
Adapter
®
EtherLink II
or II TP,
EtherLink II/16 or
II/16 TP
EtherLink Plus
®
EtherLink 16 or
EtherLink 16 TP
All EtherLink III
adapters
EtherLink/MC
EtherLink/MC TP
EtherLink/MC 32