3Com EtherLink 3C509B User Manual page 42

2-14 Configuring the ISA Adapter
9. Press [Tab] to highlight the main dialog box, and use
the arrow keys to highlight one of the parameter
options. Press [Enter].
A second dialog box appears.
10. Use the arrow keys to scroll through the list of settings
for that option. Select a setting and press [Enter].
11. Continue this procedure with any of the other
options.
Refer to the on-line help (using [F1] when the option is
highlighted) for more information about each of the
settings.
12. Press [Tab] to highlight <OK>. Press [Enter].
You must highlight <OK> and press [Enter] to save
the new settings to the adapter.
CAUTION: An ISA adapter configured for an EISA
computer will not work in an ISA computer. Refer to the
section "Reconfiguring the ISA Adapter for an ISA
Computer" in Chapter 4 for instructions.
NOTE: If you want to use the same settings on other
adapters, you can save the configuration settings to a file.
Select <Save> under <File Options> in the Adapter
Configuration dialog box. For example, type:
D:\CONFIG\3C5xx.SET
where xx represents the last two digits of the adapter
number. This saves the settings to the default file
3C509.SET for an ISA adapter or 3C579.SET for an EISA
adapter in the CONFIG directory in drive D. Use 3C509C
for the 3C509-COMBO. Refer to the on-line help (using
[F1]) for more information.