3Com EtherLink 3C509B User Manual page 32

2-4 Configuring the ISA Adapter
NOTE: To view the full text of the license
agreement, press [F1].
The auto installation screen shown in Figure 2-1
appears.
5. Read the screen and press [Enter].
6. When the main menu screen shown in Figure 2-2
appears, select NetWare DOS ODI Client and
press [Enter].
NOTE: Auto installation with configuration will
take several minutes.
7. Reboot the computer when the auto installation
process is finished.
When you do this, a DOS ODI client starts.
NOTE: To ensure that your computer is configured with
the latest client software, ask your system administrator
to configure a 3Install account on the server.
Instructions for configuring a 3Install account are
contained in the README.TXT file located in the
\QINSTALL\SERVER directory on the EtherDisk
diskette.
This concludes the installation. If there are problems,
refer to Chapter 7, "Performing Troubleshooting and
Diagnostic Tests."