2-8
Configuring the ISA Adapter
Configuring the First Adapter
After you have started the EtherDisk diskette program, as
explained in steps 1 through 5 in the previous section,
follow the steps below:
1. When the main menu shown in Figure 2-2
appears, select Configuration/Diagnostic/
Troubleshooting.
Select Configuration and Diagnostic from the next
screen. When you have multiple EtherLink III adapters
installed in your computer, the dialog box that appears
is similar to the one shown in Figure 2-3.
Figure 2-3. Main Window with Multiple Adapters