3Com EtherLink 3C509B User Manual page 40

2-12 Configuring the ISA Adapter
Table 2-1 lists each software option, the default setting,
and the available settings. Refer to the on-line help
(using [F1] when the option is highlighted) for more
information about each setting.
Table 2-1. Option Settings
Option
I/O Base Address
Interrupt Request Level 10
Boot PROM
Transceiver Type
Network Driver
Maximum Modem
Speed (fastest
modem installed)
To change the software option settings, follow these steps:
NOTE: If this computer is an operating server, notify all
users of the server to save their work and log out from the
network. The Configuration and Diagnostic Program
disrupts the normal operation of servers and workstations,
so work that is not saved may be lost.
Default Setting
300h
Disabled
On-board
DOS Client
9600 Baud
Available Settings
200h, 210h, 220h, 230h,
240h, 250h, 260h, 270h,
280h, 290h, 2A0h,
2B0h, 2C0h, 2D0h,
2E0h, 2F0h, 300h,
310h, 320h, 330h, 340h,
350h, 360h, 370h, 380h,
390h, 3A0h, 3B0h,
3C0h, 3D0h, 3E0h,
EISA
3, 5, 7, 9, 10, 11, 12, 15
Disabled, 8K, 16K, 32K
On-board Coax (BNC)
or On-board TP (RJ-45)
External (AUI/DIX)
DOS Client, Windows
or OS/2 Client, Server
No Modem, 1200,
2400, 9600, 19200, or
38400 Baud