Security And Safety Devices; Unauthorized Access; Warning Status For Safety Lock; Motor Protection System - Lippert Components Project 2000 12600 Series Owner's Manual

In these two situations the bed will not move because the pre-set end-of-stroke positions for operation are reached
and it is not possible to overcome them.
When operating the bed lifting system, clear operation area of children and obstructions or death,

Security and Safety Devices

Unauthorized Access

The controller is equipped with a safety device to protect the system against unauthorized access, through
activation in "ON" position of the key switch located on the panel (Fig. 8); with the key in position "OFF," the system
is blocked.
Turn the key in "ON" position to unblock the protection and make the normal functions.

Warning Status for Safety Lock

While the vehicle is running the bed can be secured with specific belts in order to ensure safety conditions. The
safety belts have an internal closed contact that can be used to differentiate between the status "safety belt
fastened" and "safety belt not fastened". Tab. A and Tab B. (Page 19) show how to connect the belts, identified by
the description "safety belts".
NOTE: Always block the bed on the highest limit before inserting the safety belt. The non observance of the
rule could modify the lowest stop position
The different models have been designed and manufactured keeping in mind all the main standards of safety, to
reduce and/or cancel any element of risk connected with the operation. In particular, it is important to point out the
existence of the following safety devices:
Mechanical Devices - Bed lifting systems come with an unlocking device or MANUAL ACTIVATION device which
makes it possible to operate the system manually; it is a crank device inserted in the motor (Tab. B, Page 19) that
lifts and lowers the bed ONLY IN CASE OF EMERGENCY.
NOTE: Always disconnect from power before performing any operation on the bed lifting system.

Motor Protection System

The bed lifting system comes with a protection system for the electric motor against mechanical overload that
could affect the motor while running.
It is strictly forbidden to operate the system while people are on it.
It is strictly forbidden to be on the bed lifting system while being operated.
Do not reach into the bed lifting system components while being operated.
The different models have been designed and developed so to reduce or eliminate risks related to squashing and
shearing. Risks related to bed lifting system operation are, however, virtually eliminated by the weak squashing
forces.
Rev: 11.21.2014
serious injury or property damage could occur.
Do not stand in the bed lifting system operation area.
The bed must be fixed to the safety belts.
Page 14
Euro Loft Bed Lift by Project 2000 Owner's Manual