Start-Up And Testing; Application Field And Purpose; Important Information; Maintenance - Lippert Components Project 2000 12600 Series Owner's Manual

Start-Up and Testing

The product is delivered to the customer fully tested and ready for start-up. Start-up operations and product testing
shall be carried out - once the system has been mounted on the vehicle - by specialized staff in order to reduce risks
related to product start-up.
All start-up and testing operations shall be carried out by skilled and authorized staff.

Application Field and Purpose

The product shall only and EXCLUSIVELY BE USED for the purpose for which it was developed, namely lift and lower
a bed frame inside of leisure vehicles.
The Manufacturer shall be held harmless for any possible damages due to improper, unskilled or unreasonable use.
The user shall comply with current safety regulation in force in the installation country and also to common sense
rules and make sure regular maintenance is performed correctly.
The installer, user or maintenance technician shall inform the Manufacturer about any possible defects or
deterioration that might compromise the original safety of the system.
In case of commercial components mounted on the product, the component manufacturers are liable; the
customer is liable for authorized staff using the product.

Important Information

• Safety devices shall not be tampered with for any reason.
• It is strictly forbidden to be on the bed lifting system while being operated.
• Do not interfere with the bed lifting system while operated, neither with any objects nor with hands.
• Before starting the vehicle engine and driving, always make sure the bed lifting system is in its highest position
and the safety belts are fastened (excluding garage bed).
• Do not operate the system improperly (e.g. with people on it).
• The bed lifting system shall only be used by adult and responsible staff.
• It is forbidden to use the bed lifting system while the vehicle is running.
• Do not move the bed lifting system if people or animals or items are around, under or on it.
• Always comply with the bed lifting system maximum load capacity, i.E. 880 lb in static conditions.
• Never lift weights that overcome the bed lifting system maximum load, i.E. 132 lb in dynamic conditions, people
or animals are not included and they must not be on the bed when the system is operating.
• The bed lifting system must never be used while the vehicle is running.
• It is forbidden to start the bed lift system manually with disconnected wires from motor unit to control unit.
• Should the mechanism not work, do not use the bed and ask for assistance at the next service center.

Maintenance

In order to ensure safe use of the bed lifting system without problems and in safe conditions for the operators, it is
COMPULSORY to follow the control and maintenance plan provided in this chapter.
Complying with regular maintenance norms - as well as monitoring the main bed lifting system components – is
crucial to detecting any possible anomalies before they take place and necessary in order to avoid anomalies where
and how necessary.
The different bed lifting system models have been designed and developed in such a way to reduce maintenance
operations.
Rev: 11.21.2014
Page 15
Euro Loft Bed Lift by Project 2000 Owner's Manual