Manufacturer's And Product Identification Data; Technical Features; Environmental Features; Movement And Transport - Lippert Components Project 2000 12600 Series Owner's Manual

Manufacturer's And Product Identification Data

MANUFACTURER: Project 2000 S.r.l. – Via Vivaldi, 40/A – IT 50041 Calenzano (FI) – VAT an tax No. 05025550483
BED LIFTING SYSTEM SERIES 12600

Technical Features

Always refer to the identification plate on the product.

Environmental Features

Environmental operating moisture level

Movement and Transport

The product is dispatched in perfect operating conditions after being tested at our premises.
Packaging type:
• If individually dispatched, the product is packed in a cardboard box.
• For multiple product deliveries, the bed lifting systems will be dispatched on adequately protected pallets.
Transport shall be carried out by a specialized company.
It is necessary to inform the Manufacturer of any possible damage upon arrival of the goods and to make sure the
product is perfectly preserved and intact.
Make sure the system has no evident damage and the delivery is complete and write any possible problem on the
shipping document and/or invoice.
If the damage is visible, preserve the packaging so that it can be viewed by the transport Company that delivered
the system. Contact the transport Company immediately for a damage refund request.
If the delivery does not match with the order, contact the Manufacturer immediately.
Any damage or inconsistency must be communicated timely.
Any possible material inserted as product protection must be disposed of based on their specific features.
Packaging parts may cut, cause injuries or become dangerous if they are not handled with care or improperly used;
keep out of reach of children and people who are not in charge of handling the system.
The system was not designed, manufactured and tested to operate in environments other than vehicles, with a
high chemical gaseous materials pollution level, such as chlorine, ammonia and similar materials, in environments
with a high fire and explosion risk or with a high electric risk.
However, bed lifting systems shall be transported by skilled and authorized staff.
Rev: 11.21.2014
Feature
Operating temperature
Storage temperature
Storage moisture level
May be damaged by water due to condensation
Maximum storage time for board: 10 years
Value
-10 - 60
-20 - 70
90
90
Page 6
Unit
°C
°C
%
%
Euro Loft Bed Lift by Project 2000 Owner's Manual