Configuring The Chroma Key-Less Cg Overlay Application - Sony REA-C1000 Operating Instructions Manual

Tips
• Check the position and configuration of the camera
connected to the HDMI IN 1 connector beforehand so
that the field of view captures the target people.
• You can also use this function when nothing is
connected to the HDMI IN 2 connector.
• A composite image with left/right sides flipped can be
output on the HDMI OUT 2 connector to make it easy
for the user to check their movement.
Configuring the Chroma key-less
CG Overlay application
1
Select [Chroma key-less CG Overlay] for
[Camera 1] from [Applications].
2
Click the [Setup] button.
The setup screen appears.
3
Select the image to use as the background
from the pull-down menu.
When [HDMI IN 2] input is selected, the image that
is input on the HDMI IN 2 connector becomes the
background.
To use a background, upload an image file using
[<upload new background (.png)>] in the same pull-
down menu beforehand. An image file in the
following format can be registered.
– File format: PNG
– File size: 50 MB or smaller
– Image size (horizontal × vertical pixels):
480×270 (min) to 3840×2160 (max)
Notes
• Only one file can be uploaded.
• When a new image file is uploaded, the existing
file is overwritten.
• The uploaded file is deleted if the unit is reset to
the factory defaults.
• The aspect ratio of the image is not restricted. The
image data is magnified to shrunk to fit the
picture size of the HDMI output.
4
To display the image that is input on the
HDMI IN 2 connector in P-in-P mode, place a
check mark in [Include Presentation
(Input 2)].
5
Move the blue circles to change the size of
the P-in-P display, and drag the blue frame
to adjust the position.
Clicking the [Reset] button will return the P-in-P
display to the default position and size determined
for each background.
Tip
When the background is set to the HDMI IN 2
connector, the input on the HDMI IN 2 connector
cannot be displayed in P-in-P mode.
6
When finished, click the [Next] button.
The following setup screen appears.
7
Adjust the angle of view of the camera
connected to the HDMI IN 1 connector.
8
Place a check mark for mask items ([Mask1]
to [Mask4]) you want to set, drag the
displayed blue frame to position the mask,
and drag the four blue circles to set the
mask area.
You can set up to four mask areas.
Note
Mask the mirrors, windows, etc. that are outside the
movement range of the person captured by the
camera connected to the HDMI IN 1 connector if
they are within the angle of view. Images of people
within a mask area are not composed.
44