Sony REA-C1000 Operating Instructions Manual page 40

2
Click the [Run] button.
The run screen appears.
You can check the video that is output using the
preview image while the application is running.
Adjust Framing Reset Camera
Adjust Framing
You can adjust the height and size of the tracking
target within the screen. Click the button to display
the adjustment screen. Select the height in [Face
Height Position] and the size in [Body Size], then
click the [OK] button.
<Before adjustment>
Reset Camera
Tracking a person may not be successful
occasionally, depending on their movement or
clothing. When the unit can no longer track
correctly, the unit automatically attempts to re-
detect a person. You can also click the [Reset
Camera] button to restart tracking detection from
the home position.
Application operating status
Displays the application operating status.
[Detecting]: Person is detected at the home
position. A face frame is attached to the person.
Application operating
status
<After adjustment>
40
[Tap on Target Face]: In this state, you can select
the face frame of a person to be tracked
manually. Select a face frame.
[Tracking]: Person was detected and is being
tracked.
[Target Lost]: Person being tracked is no longer
visible and tracking has been lost. If the tracking
mode is set to [Free Object Pan Tracking], the
camera moves to the recovery position and
detection restarts.
To start tracking manually
When [Start Tracking Automatically] is disabled, you
must select the person to be tracked manually while the
application is in the [Tap on Target Face] state.
When [Start Tracking Automatically] is enabled, you
can also select a person while the application is in the
[Detecting] state, before tracking normally starts, to start
tracking that person manually.
In either case, select a displayed face frame to select the
target.