Sony REA-C1000 Operating Instructions Manual page 22

Configuration items when [RTMP] is selected in
[Streaming Service]
[Server URL]
Set the URL of the upload destination server. Specify a
character string starting with "rtmp://" or "rtmps://".
[Stream Key]
Enter the stream key obtained from the site being used.
Click the [Show] button to display the entered
characters.
Note
Exercise caution when handling the stream key. There is
a risk of stream spoofing if the stream key is revealed to
a third party.
[CA Certificate]
Install the CA certificate required for streaming using
the RTMPS protocol.
Click the [Browse] button and select the CA certificate
to install. Click the [OK] button in the file selection
dialog to install the selected file into the unit. If a CA
certificate is already installed in the unit, it is updated.
Click the [Delete] button on the setup screen to delete
the installed certificate.
Notes
• Install the CA certificate required for the streaming
service.
• The China model does not support the RTMPS
protocol. Accordingly, the certificate installation
function is not available.
Configuration items when [RTSP Server] is
selected in [Streaming Service]
[Unicast Streaming]
Set the H.264 video data and AAC audio data
communication port number for each port.
Note
Specify a different number for the video port number
and audio port number.
[RTSP Video Port Number 1], [RTSP Video Port
Number 2]: Specify the H.264 video data
communication port number for RTSP unicast
streaming. Specify an even number in the range 1024
to 65534. The default settings are 51000 and 53000.
The odd-numbered ports obtained by incrementing
the ports specified here are used for data
communication and control of the video.
In addition, when there are multiple simultaneous
sessions, different port numbers are used for each
session starting from the number specified here.
The [Streaming Output 1] and [Streaming Output 2]
settings on the [Codec] tab correspond to [RTSP
Video Port Number 1] and [RTSP Video Port
Number 2], respectively.
[RTSP Audio Port Number 1], [RTSP Audio Port
Number 2]: Specify the AAC audio data
communication port number for RTSP unicast
streaming. Specify an even number in the range 1024
to 65534. The default settings are 57000 and 58000.
The odd-numbered ports obtained by incrementing
the ports specified here are used for data
communication and control of the audio.
In addition, when there are multiple simultaneous
sessions, different port numbers are used for each
session starting from the number specified here.
The [Streaming Output 1] and [Streaming Output 2]
settings on the [Codec] tab correspond to [RTSP
Audio Port Number 1] and [RTSP Audio Port
Number 2], respectively.
[RTSP Setting]: Configure the RTSP settings not
included in [Unicast Streaming].
22