Running The Ptz Auto Tracking Application - Sony REA-C1000 Operating Instructions Manual

12
When finished, click the [Next] button.
13
Configure the following settings.
PTZ limits
Specify the range of the pan operation of the camera
during tracking. If a range is not specified or the
specified range is invalid, the unit automatically sets
the range for pan operations.
This can be configured when the tracking mode is
set to [Free Object Pan Tracking]. It is not
configurable when the tracking mode is set to [Fixed
Frame Pan Tracking].
14
When finished, click the [Next] button.
15
Configure the following settings.
When the tracking mode is set to [Free
Object Pan Tracking]
Recovery position
Set the camera position, using the PTZ controls, to
move the camera to where detection is resumed
when the person is no longer visible and tracking is
lost during tracking.
This can be configured when the tracking mode is
set to [Free Object Pan Tracking]. It is not
configurable when the tracking mode is set to [Fixed
Frame Pan Tracking].
After tracking is lost, the camera moves to the
recovery position and detection restarts. After
redetection, tracking restarts automatically when a
person has been captured continuously for a
duration exceeding the time set in [Tracking Start
Time].
Note
It is recommended that you set the camera view for
the recovery position to a slightly wider view than
the home position, but re-detection and tracking
may not start correctly depending on the configured
position.
Tracking lost wait time
Set the wait time from when the person being
tracked is no longer visible until tracking is deemed
to be lost.
This can be configured when the tracking mode is
set to [Free Object Pan Tracking]. It is not
configurable when the tracking mode is set to [Fixed
Frame Pan Tracking].
When the tracking mode is set to [Fixed
Frame Pan Tracking]
Board limits
When the tracking mode is set to [Fixed Frame Pan
Tracking], the person is tracked while moving left/
right in front of the blackboard or screen while
giving priority to keeping the contents of the board
within the field of view.
Move the four blue circles displayed on the preview
screen to set the board limits to define the capture
area to be maintained on the screen when panning.
16
When finished, click the [Done] button.
The setup is saved in the unit.
Running the PTZ Auto Tracking
application
Run this application to track a person captured by the
camera, according to the setup, and to output the
tracking image.
Note
If a face is partially obscured, due to wearing a mask or
other reason, appropriate tracking may not be possible.
1
Select [PTZ Auto Tracking] from
[Applications].
39