Network - Sony REA-C1000 Operating Instructions Manual

Network

Use to configure the network settings for connection
between the unit and a computer.
[MAC Address]: Displays the MAC address of the unit.
[Ethernet Status]: Displays the current
communications speed.
[HTTP Port Number]: Displays the port number for
HTTP.
[HTTPS Port Number]: Displays the port number for
HTTPS.
Note
The China model does not support the SSL function.
To obtain an IP address (IPv4) automatically
from a DHCP server
Place a check mark in [Obtain an IP address
automatically (DHCP)] to automatically acquire the IP
address, subnet mask, and default gateway.
[IP Address]: Displays the current IP address.
[Subnet Mask]: Displays the current subnet mask
value.
[Default Gateway]: Displays the current default
gateway.
Note
If you select [Obtain an IP address automatically
(DHCP)], check that a DHCP server is operating on the
network.
To specify a fixed IP address (IPv4)
Clear the [Obtain an IP address automatically (DHCP)]
checkbox and enter the following items.
[IP Address]: Enter the IP address of the unit.
[Subnet Mask]: Enter the subnet mask value.
[Default Gateway]: Enter the default gateway.
To obtain an IP address (IPv6) automatically
Place a check mark in [Obtain IPv6 address
automatically] to automatically acquire the IP address,
prefix length, and default gateway.
[IPv6 Address 1] / [IPv6 Address 2]: Displays the
current IPv6 addresses.
[Link-Local IP Address]: Displays the current IPv6
link-local IP address.
[Prefix Length]: Displays the current prefix length.
[IPv6 Default Gateway]: Displays the current IPv6
default gateway.
Notes
• If you select [Obtain IPv6 address automatically],
check with the network administrator whether IPv6
assignment is supported.
• Operation in a multi-prefix environment is not
supported, and communication may not operate
correctly.
To specify a fixed IP address (IPv6)
Clear the [Obtain IPv6 address automatically] checkbox
and enter the following items.
[IPv6 Address 1]: Enter the IP address of the unit.
[Prefix Length]: Enter the prefix length.
[IPv6 Default Gateway]: Enter the default gateway.
To obtain the DNS server address
automatically
Place a check mark in [Obtain DNS server address
automatically] to automatically acquire the addresses of
the primary DNS server and secondary DNS server.
[Primary DNS Server]: Displays the current primary
DNS server IP address.
[Secondary DNS Server]: Displays the current
secondary DNS server IP address.
Note
To obtain the DNS server address automatically, either
[Obtain an IP address automatically (DHCP)] or [Obtain
IPv6 address automatically] must be enabled. Check
with the network administrator whether the environment
supports a server address being obtained automatically.
To specify the DNS server address manually
Clear the [Obtain DNS server address automatically]
checkbox and enter the following items.
[Primary DNS Server]: Enter the IP address of the
primary DNS server.
[Secondary DNS Server]: Enter the IP address of the
secondary DNS server.
17