Table of Contents
Advertisement
5
Set the maximum and minimum sizes for
detection.
Set the maximum size and minimum size of the
screen that would be fully occupied by a person
when standing.
Move the four blue circles displayed on the preview
screen to mark the maximum size. Move the four
purple circles displayed on the preview screen to
mark the minimum size.
This is used to distinguish between the difference in
size that occurs between a person standing near the
front and a person standing further away when
viewed from the camera.
6
When finished, click the [Done] button.
The setup is saved in the unit.
Running the Close-up by Gesture
application
Run this application to automatically trigger the zoom
function when a person stands up and to cancel the zoom
when a person sits down.
1
Select [Close-up by Gesture] for [Camera 1]
from [Applications].
2
Click the [Run] button on the screen.
The run screen appears.
When zoom is active, the normal image is shown on
the right and the close-up image is shown on the left.
Notes
• The close-up operation may not function correctly if
the focus or exposure is not properly set for the
detection area image captured by the camera.
• The close-up operation may not function correctly
depending on the density of people in the detection
area, the size of the person, and the attire of the person.
• The resolution of the close-up output image may be
reduced depending on the resolution of the input
image from the camera and the close-up zoom
magnification.
42
Advertisement
Table of Contents
