Sony REA-C1000 Operating Instructions Manual page 34

You can check the video that is output using the
preview image while the application is running.
Show person Refresh
overlay background
Person's
transparency
Snapshot button
You can click the button to download an extracted
image (an image without the person overlay) as an
image file. The image file is a wide view when the
output field of view is set to [Full View] or [Variable
View], and a cropped image when set to [Cropped
View].
Show Person
Insert a check mark to display the person
superimposed on the extracted handwritten content
for output. The person is reflected in the output only
while the application is running.
To superimpose the person all the time, place a
check mark in [Show Person] (page 31) on the
Handwriting Extraction application setup screen.
Person's transparency
Set the transparency used when superimposing the
person. The person is reflected in the output only
while the application is running.
To use the same transparency person all the time,
place a check mark in [Person's transparency]
(page 31) on the Handwriting Extraction application
setup screen.
Refresh background
Performs the extraction process immediately.
Application operating status
Displays the application operating status.
[Handwriting Detected]: The contents on the
drawing board are being extracted.
[Trying to Detect Handwriting]: Extraction
cannot be achieved successfully at the current
time. Reset the extraction result up to the current
time, and start extracting again.
You can click the snapshot button in the top right
of the screen to download an extracted image as
an image file.
Notes
• Extraction may not start immediately after starting the
Snapshot button
application due to extraction preprocessing.
• When running, you can change the overlap mode and
person's transparency. However, the changes are not
saved in the settings.
• During extraction, the extraction may not be
successful if there are changes in the environment,
such as changes in the brightness of the room.
• The extraction may not be successful depending on
the resolution of the input image.
Application
operating status
34