Starting Applications; Checking Notifications - Sony REA-C1000 Operating Instructions Manual

Licenses
The following option function licenses are available for
the unit.
• Handwriting Extraction license
Enables the Handwriting Extraction function.
REA-L0100: Permanent license
REA-L0106: Period license (180 days)
REA-L0112: Period license (365 days)
• PTZ Auto Tracking license
Enables the PTZ Auto Tracking function.
REA-L0200: Permanent license
• Close-up by Gesture license
Enables the Close-up by Gesture function.
REA-L0300: Permanent license
REA-L0306: Period license (180 days)
REA-L0312: Period license (365 days)
• Chroma key-less CG Overlay license
Enables the Chroma key-less CG Overlay function.
REA-L0400: Permanent license
REA-L0401: Period license (30 days)
REA-L0403: Period license (90 days)
REA-L0412: Period license (365 days)
• Focus Area Cropping license
Enables the Focus Area Cropping function.
REA-L0500: Permanent license
REA-L0501: Period license (30 days)
REA-L0503: Period license (90 days)
REA-L0512: Period license (365 days)
Pre-installed licenses
You can trial test option functions by activating pre-
installed licenses on the unit, without having to purchase
and install any licenses.
For details about activation, see "Licenses" (page 24).
Notes
• Activating pre-installed licenses enables you to trial
test option functions for a limited time only. However,
if a period license is installed for the same function as
a trial license which has not been activated, that trial
license becomes disabled.
• For details about purchasing licenses, contact your
distributor.

Starting applications

Access the unit from a web browser to select and run an
application.
A license may need to be enabled to run an application.
For details about configuring applications, see
"Application Setup and Operation" (page 28).
Tip
Tip
If the unit is turned off normally while an application is
running, the application will automatically restart the
next time the unit is turned on.

Checking notifications

You can check the status of the unit and the status of
connections with external devices in the notifications
dialog.
The notifications dialog is displayed automatically
when the status of the unit changes. You can also display
the dialog by clicking the notifications button at the top
right of the screen.
For details about notifications, see "Message List"
(page 51).
13