[Date & Time] Tab; [Initialize] Tab - Sony REA-C1000 Operating Instructions Manual

[Date & Time] tab
[Current Date & Time]
Displays the set date and time of the unit.
Note
The date and time set at the time of purchase may not be
accurate. Always check the setting.
[PC Clock]
Displays the date and time of the computer being used.
[Date & Time Format]
Select the date and time format to display.
You can select [yyyy-mm-dd hh:mm:ss], [mm-dd-yyyy
hh:mm:ss], or [dd-mm-yyyy hh:mm:ss].
[Time Setting]
Select the method for setting the date and time.
[Keep current setting]: Select to keep the current
settings for the date and time of the unit.
[Synchronize with PC]: Select to synchronize the date
and time of the unit with the date and time of the
computer.
[Manual Setting]: Select to set the date and time of the
unit manually. Specify a value in the [Current Date
& Time] field.
[Synchronize with NTP]: Select to synchronize the
date and time of the unit with the NTP (Network
Time Protocol) server of a time server. If you select
[Synchronize with NTP], specify the NTP server.
[NTP Server]
Synchronize using the entered NTP server address.
[Time Zone]
Set the time zone for the region in which the unit is
installed relative to Greenwich Mean Time.
Note
If the time zone selected in [Time Zone] and the time
zone of the computer are different, a date and time
reflecting the difference in time zones is set on the unit.
To adjust for Daylight Savings Time
automatically
Place a check mark in [Automatically adjust for
Daylight Savings Time.] to automatically adjust the
time for daylight savings time (summer time) in the
selected time zone.

[Initialize] tab

[Restart]
Click the [Restart] button when you want to restart the
unit. Click the [OK] button in the displayed
confirmation dialog to restart the unit.
[Standby]
Click the [Standby] button to switch the unit to standby
state. In standby state, the input and output of video and
audio stops.
When the [Standby] button is clicked, a screen
indicating standby state appears. Click the [On] button
on the screen to release standby state.
[Power Off]
Click the [Power Off] button when you want to shut
down the unit. Click the [OK] button in the displayed
confirmation dialog to shut down the unit.
Press the POWER button on the unit when you want to
turn the unit on again.
[Factory Reset]
Use this when you want to reset the unit to the factory
default settings. Click the [Factory Reset] button, and
click the [OK] button in the displayed confirmation
dialog to reset the settings to the factory default settings
and restart the unit.
You can reset the unit to its factory default settings using
the buttons on the unit (page 6).
To retain network settings
Place a check mark in [Retain current network settings]
to retain only the current network settings when
resetting the unit to the factory default settings. The
corresponding items are configured on the [Network]
and [Security] pages.
Notes
• Information relating to option function licenses is
retained even when a factory reset is performed.
• To protect customer information, reset the settings of
this unit to the factory settings when lending or
transferring the unit to another person and when
disposing of the unit.
26