Note
If the system frequency is changed, you must restart the
unit.
Audio
Use to configure the audio of the unit.
To enable the audio function
Select [Enable] in [Send]. The following items can be
configured when the audio function is enabled.
[Audio Input Selection]
Select the audio data ([HDMI IN] or [MIC IN]) that is
output on [HDMI OUT 1] and [HDMI OUT 2].
[HDMI IN]: Use the audio data that is input on the
HDMI IN connector.
[MIC IN]: Use the audio data that is input on the MIC
IN connector.
[Mic Input Setting]
Set the audio data that is input from the microphone
connected to the MIC IN connector.
[Delay]: Set the audio delay so that the audio data input
from the microphone is synced with the video data
that is input from HDMI IN.
[Volume]: Set the volume.
16