Adjustments - LifeGear F1 Body/BENCH Owner's Manual

ADJUSTMENTS

Adjusting the Leg Height Adjustable Tube
Turn the Round Knob in a counterclockwise direction until it can be pulled out. Pull out the
Round Knob and then slide the Leg Height Adjustable Tube up or down direction to the
suitable position. Lock the Leg Height Adjustable Tube in place by releasing the Round
Knob and sliding the Leg Height Adjustable Tube up or down slightly until the Round Knob
"pops" down into the locked position. For added safety, tighten the Round Knob in a
clockwise direction.
Adjusting the Adjustable Weight Crutch
Turn the Triangle Knob in a counterclockwise direction until the Adjustable Weight Crutch
can be slid up or down and then slide the Adjustable Weight Crutch up or down direction to
the suitable position. Lock the Adjustable Weight Crutch in place by tightening the Triangle
Knob in a clockwise direction.
NOTE: Please adjust the Adjustable Weight Crutches to the same height.
Adjusting the Seat Pad Height
Lift the Seat Pad up then align the pin holes on the U Shaped Seat Adjustment and Seat
Support Tube. Insert the Ring Pin into the holes on the U Shaped Seat Adjustment and
Seat Support Tube to lock the Seat Pad in place.
Round Knob
Triangle Knob
13