Adjustments - LifeGear 26470 Owner's Manual

ADJUSTMENTS

Adjusting the Tension Control Knob
To increase the tension, turn the tension
control knob in a clockwise direction.
To decrease the tension, turn the tension
control knob in a counterclockwise direction.
Adjusting the Rear Stabilizer End Cap
Turn the rear stabilizer end cap on the rear
stabilizer as needed to level the recumbent bike.
Adjusting the Seat Forth or Back
Turn the round knob in a counterclockwise
direction until it can be pulled out. Pull
out the round knob and then slide the rear
main frame forth or back direction to the
suitable position. Lock the rear main
frame in place by releasing the round knob
and sliding the rear main frame forth or
back slightly until the round knob "pops"
down into the locked position. For added
safety, tighten the round knob in a
clockwise direction.
NOTE: When adjusting the rear main
frame back or forth, make sure the
bushing does not exceed the mark line
on the rear main frame.
Tension Control Knob
Rear Stabilizer End Cap
15
Round Knob