Table of Contents
Advertisement
7.4 Firmware upgrade
Firmware upgrade can be performed by using the "PrinterSet" software tool available on www.custom4u.it.
To upgrade irmware, proceed as follows:
1
Login to the website www.custom4u.it, type in the
Login to the website www.custom4u.it, type in the
product code of the device and download the latest
product code of the device and download the latest
irmware release available.
firmware release available.
2
Connect the device to a PC directly
Connect the device to a PC directly
(see
paragraph
3.2), without using HUB devices.
(see paragraph 3.1), without using HUB devices.
3
Start the "PrinterSet" software tool.
ATTENTION:
During saving, it is strongly discouraged to disconnect the communication cable or to remove the power supply of the
PC or the device.
54
4
LOAD
From Device
From File
Click on LOAD > FROM DEVICE and select
the device connected to the PC.
Click on LOAD > From file and select a .psc file on your PC
5
LOAD
From Device
SETUP
From File
FONTS
UPGRADE
Click on UPGRADE and
follow the instructions shown on the screen.
PORT
SAVE
Drag and drop a .psc file
SAVE
PORT
To perform an upgrade selec
For firmware upgrade, click on OPEN and
a.psw or .pfw file on your PC
For module upgrade, click on OPEN and
a.mod file on your PC
Advertisement
Table of Contents
Need help?
Do you have a question about the MODUS3 and is the answer not in the manual?
Questions and answers