Custom Audio Electronics MODUS3 User Manual page 53

Autocutter
1
Disconnect the power supply cable and
Disconnect the power supply cable and
lift the device cover (see
open the device cover (see paragraph 4.1).
2
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the device.
Clean the autocutter
by using compressed air.
paragraph 4.1).
ON
Alcohol, solvent
Case
1
Disconnect the power supply cable.
2
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the device.
To clean the device,
use compressed air or a soft cloth.
ON
Alcohol, solvent
53