Table of Contents
Advertisement
7.2 Planning of cleaning operations
The regular cleaning of the device keeps the print quality and extends its life. The following table shows the recommended
planning for the cleaning operations. If you use the device in dusty environments, you must reduce the intervals between
the cleaning operations. For speciic procedures, see paragraph
EVERY PAPER CHANGE
Printhead
Rollers
EVERY 5 PAPER CHANGES
Autocutter
Paper path
Sensors
EVERY 6 MONTHS OR AS NEEDED
Case
50
7.3.
Use compressed air or tweezers
Use compressed air or a soft cloth
Use isopropyl alcohol
Use isopropyl alcohol
Use compressed air
Use compressed air
Advertisement
Table of Contents
Need help?
Do you have a question about the MODUS3 and is the answer not in the manual?
Questions and answers