Table of Contents
Advertisement
Printhead
1
Disconnect the power supply cable and
Disconnect the power supply cable and
open the device cover (see paragraph 4.1).
lift the device cover (see
2
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
Clean the printhead by using
a non-abrasive cloth moistened with isopropyl.
52
paragraph
4.1).
ISOPROPYL ALCOHOL
ON
Platen roller
1
Disconnect the power supply cable and
Disconnect the power supply cable and
lift the device cover (see
open the device cover (see paragraph 4.1).
2
ISOPROPYL ALCOHOL
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
Clean the platen roller by using
a non-abrasive cloth moistened with isopropyl.
paragraph
4.1).
ON
Advertisement
Table of Contents
Need help?
Do you have a question about the MODUS3 and is the answer not in the manual?
Questions and answers