Table Of Contents; Introduction - Lippert Components Auto Level Owner's Manual

Introduction
Component Description
Safety
operation
Selecting A Campsite
Zero Point Calibration
Automatic Leveling Procedure
Automatic Leveling Descriptive Logic
Manual Leveling Procedure
Auto Jack Retract Procedures
Manual Jack Retract Procedures
troubleshooting
Manual Override of Power System and Jacks
Automatic Safety Shutoff
Drive Away Protection System
Jacks Up Verification
Low Voltage Signal
Error Mode
Excess Slope
User Alarm Mode
Miscellaneous
Troubleshooting Table
Troubleshooting Table Continued
Maintenance
Fluid Recommendation
Purging the Hydraulic System
Preventative Maintenance
Wiring Diagram
Hydraulic Plumbing Diagram
Notes

Introduction

Note: The hydraulic leveling system was designed for use only on a Sprinter chassis.
The four-point three-valve hydraulic leveling system is a hydraulic system which includes four points of
contact utilizing jacks and a three-valve system. A 12V DC electric motor drives a hydraulic pump that moves
fluid through a system of hoses, fittings and jacks to level and stabilize the coach. Mechanical portions of the
hydraulic leveling system are replaceable. Contact Lippert Components, Inc. to obtain replacement parts.
The hydraulic leveling system is primed and tested at the factory. However, the system is shipped dry to
avoid hazardous material restrictions.
Additional information about this product can be obtained from lci1.com/support or by downloading
the free myLCI app. The app is available on iTunes® for iPhone® and iPad® and also on Google Play™ for
Android™ users. iTunes®, iPhone®, and iPad® are registered trademarks of Apple Inc. Google Play™ and
Android™ are trademarks of Google Inc.
For information on the assembly or individual components of this product, please visit:
https://support.lci1.com/hydraulic-leveling-lcd-br4-point3-valve
Rev: 06.25.20

tABLe oF CoNteNtS

Page 2
.
2
3
3
4
4
4
5
6
6
7
7
8
8
9
9
9
9
10
10
10
10
11
12
12
12
12
13
14-15
16
17
CCD-0001515