Setting Of Auto Calibration; Auto Calibration - Fuji Electric ZKJ Series Instruction Manual

6.4 Setting of auto calibration

6.4.1 Auto calibration

Auto calibration is automatically carried out at the time cycle when zero calibration and span cali-
bration are set.
Before changing the setting of auto calibration, set the ON/OFF to OFF.
Press the
ENT
screen that appears, point the cursor to
any item you want to set by pressing the
or key. Press the
value entry or the setting. For the value
entry or setting change, use the
key. To change the setting, use the
key to move the cursor to the right.
After setting, press the
calibration is carried out by the entered
setting value.
Description of setting items
To close "Setting of Auto calibration"
To close the "Setting of Auto calibration" or cancel
this mode midway, press the
A previous screen will return.
key
MODE
or key.
key.
key.
ENT
or
key, and auto
ENT
key.
ESC
6 - 14
Measurement Mode
-
-
End of Auto Calibration Setting
MODE
( )
ENT
( )
ENT
Press the or
the key, and
date and time are
displayed
alternately.
ENT