Avaya XT Series User Manual page 56

Starting a New Call
2. To dial a recently contacted endpoint, access the recent calls list. From the Avaya XT
Series web interface, select Make your call > Basic Options > Recent Calls. From the
endpoint's main menu, select Call , or press
Select the entry to dial, and then select Call or press ok/menu on the XT Remote Control
Unit.
3. To dial a saved contact, access the list of contacts. From the Avaya XT Series web
interface, select Make your call > Basic Options > Contacts. From the endpoint's main
menu, select Contacts.
Select the entry to dial, and then select Call or press ok/menu on the XT Remote Control
Unit.
4. To join a meeting hosted elsewhere, call the endpoint or Media Server which hosts the
meeting, using any of the above dial methods.
5. To host a meeting on your built-in Media Server by dialing out to other participants:
a. Call the first participant.
b. Call others to join. From the Avaya XT Series web interface, select Make your Call >
Basic Options > Direct Call / Contacts. From the endpoint, within the meeting with
the first participant, press ok/menu and select Participants > Invite a new
participant > By Address / From Contacts.
c. Select a contact or enter a dial string to call the next participant.
d. Repeat to add more participants.
6. To host a meeting on your built-in Media Server by giving your endpoint's contact details,
be sure to give the correct information.
To accept an incoming call, select Accept.
March 2021
on the XT Remote Control Unit.
Figure 21: Invite Participant
User Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
56