Table of Contents
Advertisement
OPERATION (CONTINUED)
NORMAL OPERATION MODE (CONTINUED)
Display Button: Batch total reset
When a batch total (see Figure
10-1) is displayed, press and
continue to hold Display button for
3 seconds; the software will display
Figure 10-1
Figure 10-2
Figure 10-3
Figure 10-4
NOTE: When the accumulative total is displayed in Normal Operation
Mode, it cannot be reset using the Display button. Accumulative total can
Figure 10-5
16
a three second count down, then
reset the batch total to zero. (See
Figures 10-2 thru 10-4)
NOTE: If Display button is released
prior to count down completion,
the software returns to batch total
screen. (See Figure 10-1)
NOTE: After count down completes,
display will show 0.000 until user
releases Display button.
(See Figure 10-3)
NOTE: After Display button is
released, the display will return
to Batch Total screen and will
increment the total if flow is
detected. (See Figure 10-4)
only be reset by removing the batteries,
holding down the Display button, and
replacing the batteries. If the user attempts
to reset it using the Display button, the
software will display a "Reset Denied"
message on the LCD until the button is
released. (See Figure 10-5).
Advertisement
Table of Contents
