Table of Contents
Advertisement
SPECIFICATIONS (CONTINUED)
SPECIFICATIONS (CONTINUED)
AGENCY APPROVALS
AGENCY APPROVALS
Q9 Industrial Grade Computer Electronics
INTRINSICALLY SAFE FOR
CLASS I, II, III, DIV. 1,
GROUPS ABCDEFG,
T4 Ta= -40° to +54°C
Intrinsically safe approval only applies when
NONINCENDIVE
FOR CLASS I, II, III, DIV. 2,
used with a FLOMEC® FM Approved meter.
GROUPS ABCDFG, T4 Ta= -40° to +54°C
GREAT PLAINS INDUSTRIES, INC.,
5252 E. 36TH ST. NORTH,
Q9 Industrial Grade Computer Electronics when installed on a
IP65
NOTE: When a component with Approval Agency ratings is mated to another
component with the same Approval Agency ratings, the combination may gain
environmental approvals.
When one of the components has lessor or no Approval Agency ratings, the resultant
combination assumes the ratings of the lessor rated component.
If one component has no ratings, the resultant combination has no ratings.
Specific Conditions of Use
1. All computer assemblies are to be used with GPI battery 902004-02 except Q1, Q9, and
R9 versions which use Energizer E92 / EN92, or Duracell MN2400 Alkaline batteries.
2. GPI remote kit assembly 113275-1 may be used with the meter when installed in accor-
dance with GPI Manual No.920507-01. GPI Remote Kit Assembly 113275-10 may be used
with the meter when installed in accordance with GPI Manual No. 920507-02.
3. The apparatus enclosure may contain aluminum which is considered to constitute a potential
risk of ignition by impact or friction. Care must be taken into account during installation and
use to prevent impact or friction.
4. Part of the enclosure is constructed from plastic. To prevent the risk of electrostatic spark-
ing the plastic surface should only be cleaned with a damp cloth.
12
WARNING:
See Owner's
Manual for
Warnings and
Cautions Before
Installation.
WICHITA, KANSAS
67220 U.S.A
FLOMEC FM Approved meter.
REMOTE KIT ASSEMBLY ( 113275 - 10 )
7
Advertisement
Table of Contents
