Assa Abloy Corbin Russwin SE LP10 ML20600 Installation Instructions Manual page 24

Step 3 Thread adapter plate hub into
lever and fully tighten
NOTE: Spindle can be
used to help thread hub
into lever
Adapter Plate Hub
Install O/S trim assembly
Step 5
7) Installation Instructions (Continued)
Outside Face of Door
SE LP10 ML20600 Mortise Lock
Step 4 Align adapter plate hub with square
hole in lever; keeping hub as tight
as possible
Install I/S adapter plate
Step 6
Set screw hole in hub faces
away from lock edge
Fig. 13
Use Correct Spindle Orientation
BAD
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All
rights reserved. Reproduction in whole or in part without the express written
24
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Inside Face of Door
GOOD
Lever