SE LP10 ML20600 Mortise Lock
Install I/S spindle and rose
Step 7
Install I/S lever with set screw
Step 8
14. Install Armored Front Plate:
a. Securely tighten (2) lock body screws.
b. Attach armored front with two #8 x ¼"
screws (Fig. 14).
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All
rights reserved. Reproduction in whole or in part without the express written
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
7) Installation Instructions (Continued)
Align studs on rose with
bushings in adapter plate
Fig. 14
Outside Face
Tighten
securely
25
of Door
Armored
Front
(2) #8 x 1/4"