Assa Abloy Corbin Russwin SE LP10 ML20600 Installation Instructions Manual page 19

Mortise lock

SE LP10 ML20600 Mortise Lock

11. Install Cylinder:

a. Thread cylinder into lock body (Fig. 11a).

b. Insert key 75% of the way and utilize the key to rotate the cylinder into the rest of the cylinder hole.

Note: Make sure cylinder is oriented correctly (Fig. 11a1).

c. Tighten cylinder clamp using 7/64" allen wrench (provided) (Fig. 11b).

d. Turn the key to make sure that lock functions correctly (latch, deadbolt and key).

Outside Face

of Door

Position cylinder so that logo is

rights reserved. Reproduction in whole or in part without the express written

permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

7) Installation Instructions (Continued)

Fig. 11a

right-side up.

Correct

Incorrect

Fig. 11a1

Fig. 11b

Table of Contents