Assa Abloy Corbin Russwin SE LP10 ML20600 Installation Instructions Manual page 20

12. Install Inside Escutcheon:
a. Feed excess ElectroLynx
harness under escutcheon.
b. Tighten the inside escutcheon securely to the mounting plate using the 8-32 x 5/8"
screw for the top of the escutcheon and the 8-32 x 1/4" screw for the bottom of
the escutcheon located under the turn lever (Fig, 12). Be careful not to pinch wires
under escutcheon when tightening screws.
c. Be sure the turn assembly is functional and, if equipped with a deadbolt, that the
deadbolt functions properly.
7) Installation Instructions (Continued)
and reader wires into door prep. Tuck excess body wire
®
Fig. 12
SE LP10 ML20600 Mortise Lock
Inside Face of
Door
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All
rights reserved. Reproduction in whole or in part without the express written
20
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.