Assa Abloy Corbin Russwin SE LP10 ML20600 Installation Instructions Manual page 22

Step 4
Inside Face of Door
Fig. 4a
Step 5 Align adjustment bolt with threaded hole in lever
Adjustment bolt needs
to be threaded in farther.
Step 6 Install I/S lever with set screw:
Notes:
• Unthread Adjustment Bolt approximately four turns
for a good starting point (After being fully tightened)
• Make sure O/S lever is fully inserted into adapter
plate before aligning adjustment bolt.
7) Installation Instructions (Continued)
Adjustment bolt needs
to be unthreaded.
SE LP10 ML20600 Mortise Lock
Use Correct Spindle Orientation
STANDARD
Good
Lever
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All
rights reserved. Reproduction in whole or in part without the express written
22
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
MUSÉO
Bad
Fig. 4b
Adjustment bolt fully aligned.