Washing And Timed Drying; At The End Of The Drying Programme - John Lewis JLBIWD1405 User Manual

Washing and Timed Drying

1. Tap on the Time dry button repeatedly to set
the desired time value (see the "Timed drying"
table the "Programmes" chapter). The drying
level indicator
comes on.
Each time you tap on this button the time value
increases by 5 minutes. The display shows the
set new time value.
2. Touch the Start/Pause button to start the
programme. The SensiCare estimation starts.
In the display the door locked
comes on.
The display also shows the remaining
programme time.
At the end of the drying
programme
• The appliance stops automatically.
• The acoustic signals operate (if they are active).
• In the display
• The indicator of the Start/Pause button goes
off. The door locked
the door unlocks.
• Press the On/Off button for some seconds to
deactivate the appliance.
After some minutes from the
end of the programme, the
energy saving function
deactivates the appliance
automatically.
1. Remove the laundry from the appliance.
2. Make sure that the drum is empty.
After drying phase, clean the drum,
the seal and the inside of the door
with a wet cloth.
44
goes off and the indicator
indicator
comes on.
indicator goes off and
Washer Dryer User Manual