Stand-By Function - John Lewis JLBIWD1405 User Manual

2. Press the Start/Pause button: the appliance
drains the water and spins.
The option indicator Rinse Hold
If you have selected No Spin
, the appliance will only drain
the water.
3. When the programme is completed and the
door locked indicator
open the door.
4. Press the On/Off button for a few seconds to
deactivate the appliance.

Stand-by function

The Stand-by function automatically deactivates
the appliance to reduce the energy consumption
when:
• You do not use the appliance for 5 minutes
when no programme is running.
Press the button On/Off to activate the
appliance again.
• 5 minutes after the end of the washing
programme.
Press the On/Off button to activate the
appliance again.
The display shows the end of the last
programme.
Turn the programme dial to set a new cycle.
If the dial is rotated to the "Reset" position
the appliance automatically turns off in 30
seconds.
If you set a programme or an
option that ends with water in the
drum, the Stand-by function
doesn't deactivate the appliance
to remind you to drain the water.
42
disappears.
goes off, you can
,
Washer Dryer User Manual