Daily Use - Washing & Drying; Non-Stop Programme; Washing And Drying At Automatic Levels; Washing And Timed Drying - John Lewis JLWD 1612 User Manual

Daily use - Washing & Drying
Warning! Refer to Safety
chapters.

NON-STOP programme

Warning! Do not put a plastic
device/ball for the detergent
into the drum.
1. Press button On/Off for some seconds to
activate the appliance .
2. Load the laundry one item at a time.
3. Put the detergent and the additives in the
appropriate compartment.
4. Turn the programme dial to the washing
programme. The display shows the symbols of
the different washing phases.
5.
Warning! Do not set a spin
speed lower than the
automatic speed of the set
programme.
Set the available options.
Washing and Drying at
automatic levels
1. Press button Time dry repeatedly until the
black line appears under one of the dryness
level symbol.
The iron dry level
The cupboard dry level
The extra dry level
30
The drying symbol comes on.
The anti-crease symbol comes on.
The display shows that the appliance is ready to
start.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load size.
To have a good drying the
appliance does not let you set a
too low spin speed for the items to
be washed and dried.
2. Press button Start/Pause to start the
programme.
The set dryness level symbol stays on (e.g.
Cupboard dry). The others level symbols go
off.
The door locked symbol comes on.
The display shows the new time value each
minute.
The last minutes of the drying cycle
the appliance performs the anti-
crease and the cooling phases.

Washing and Timed drying

1.
Do not put a plastic device/ball
for the detergent into the
drum.
Press button Dryness level repeatedly to set
the drying time value:
Washer Dryer User Manual