Installing Anti-Tilting Device (Accessory) - John Lewis JLBIWD1405 User Manual

Installing anti-tilting device
(Accessory)
Install this accessory in case of risk of appliance tilting only.
If the height of the counter is 820 mm or lower, you cannot install the anti-tilting
device.
~10mm
Washer Dryer User Manual
Before proceeding with appliance building in, bring it
near the recess and preposition the inlet hose, the drain
hose and the mains cable.
Warning! Make sure they are
not kinked or squashed.
1. Remove the screws of the top cover on the rear of
the appliance and install the anti-tilting device as shown
in the drawing.
2. Adjust the anti-tilting device so that the distance from
the counter is 10mm. Loosen the nut counterclockwise
with a 3mm wrench. Adjust the height and turn the nut
clockwise to fix it.
17