John Lewis JLBIWD1405 User Manual page 20

max. 105°
1
2
E
D
C
20
Mounting the door
Fix the hinges to the hinge supports on the appliance by
means of the two supplied screws B.
Counter-magnet
The appliance is pre set for a magnetic closure.
For a correct closure:
N
1.
2.
To align the door perfectly, make
sure that the edge of cupboard door
is parallel with the appliance edge
and to respect the proper opening
angle (max. 105 °).
The hinges can be adjusted to
compensate for possible uneven
thickness of the door.
Position the screw C and the counter-magnet D on
the magnetic plate N. Lean the cupboard door
against the screw until it leaves a mark.
Open the cupboard door and screw the counter-
magnet D (steel disk + rubber ring E) with the
screw C in the inner side of the cupboard door,
where the screw left the mark as described in the
first step.
Washer Dryer User Manual