John Lewis JLBIWD1405 User Manual page 19

N
O
y
x
y
16-22 mm
Ø 35 mm
12,5 - 14 mm
595-598 mm
Washer Dryer User Manual
M
449
mm
22±1,5 mm
A
Make sure that the plate with
magnet is on the upper position.
Cupboard door preparation
For countersinking the door, it is
recommended to call a professional.
Align the cupboard door to the furniture correctly.
Measure the distance X to fix the height of the hole to
countersink the upper hinge. The centre of the hole Y
should be at the same height of the stroke on the hinge
support.
Set the position of the lower hole respecting dimensions
and distances shown in the drawing (449 mm).
Countersink the holes.
Hinges
To mount the hinges it is necessary to drill two holes
(dia. 35 mm, depth 12.5 - 14 mm depending on the
depth of cupboard door) on the inner side of the door.
The hinges will be fixed to the door by means of the
four supplied screws A.
19