Key Icon Description; Recommendation - Icom IC-M803 Instruction Manual

KEY ICON DESCRIPTION

The keys are described in this manual as follows:
The keys that have words or letters on them are
described with the characters "[ ]."
Example: [ENT], [CLR]
The Software Keys are described with the words or
letters on a blue background, such as
.
The functions of the keys are shown at the bottom of
the display. Push the key below the desired function.
You can use the following keys on the Menu screen.
FUNCTION
Select
Enter
Go to the next tree level
Go back to the previous
tree level
Cancel
Exit
The following action icons describe [CH/GRP], [ENT],
the Keypad keys, and [◄], [►], [▲], and [▼]
z Rotate : Rotate [CH/GRP] to select.
z Push : Push [ENT] to enter or set.
z Push : Push the Keypad keys to enter a digit
or text.
[◄]/[►]
z Push : Push [◄], [►], [▲], or [▼] to select.
[▲]/[▼]
or
ACTION
Push [▲] or [▼].
Push [ENT], [CH/GRP], or
.
Push [ENT], [CH/GRP], [►]
or .
Push [CLR], [◄], or
.
Push [CLR].
Push .

RECOMMENDATION

CLEAN THE REMOTE CONTROLLERʼS
FRONT PANEL THOROUGHLY IN A BOWL OF
FRESHWATER after exposure to saltwater, and dry
it before operating. Otherwise, the remote controllerʼs
keys, switches may become unusable, due to salt
crystallization.
L The connectors on the rear panel do not meet IPX7.
NOTE: If the remote controller's waterproof
protection appears defective, carefully clean it with
a soft, damp (freshwater) cloth, then dry it before
operating. The remote controller may lose its
waterproof protection if the case or connector cover
is cracked or broken, or the remote controller has
been dropped. Contact your Icom distributor or your
dealer for advice.
vi