Table of Contents
Advertisement
50
Program recording
Desired MD tracks can be programmed in the desired sequence and recorded onto a tape.
The tape deck of the unit can record signals only on Normal (Type ) and High (Type ) tapes. It cannot record on
Metal (Type
) tapes.
Make sure to put the MD recorder or cassette deck to stop mode.
1
Make the preparations for recording.
1
Select the MD input.
2
MD
: Insert a disc into the MD recorder.
TAPE : Perform steps 1 to 3 of the procedure in "Recording on TAPE". ›
2
Program the desired sequence of MD tracks.
Perform steps 1 and 2 of the procedure in
"Listening to the desired sequence (Pro-
gram playback)". ‡
3
Put the MD recorder in pause mode before starting program playback.
(Press twice.)
4
Put the tape deck in record-pause mode.
(Press twice.)
TAPE rec
5
Start recording.
To interrupt a recording
(Recording and playback will be stopped)
(MD = TAPE)
MD
6
MD
6
7
stop
Tuning
Mode
Convenient recording methods
÷ When the PGM key is pressed to cancel the ed-
ited contents, the entire editing contents will be
°
erased.
÷ Tracks programmed in excess of the tape recording
time will be cut off.
÷ When program playback starts, press the 4 key once
to return to the beginning of the track.
÷ Tape recording starts at the same time as the MD pro-
gram playback.
At the end of the recording
Cassette deck
:
Stop is executed after an unre-
corded portion of about 4 sec.
has been produced.
Advertisement
Table of Contents
