Cd Program Recording (Tape B Only) - Kenwood XD-DV90 Instruction Manual

CD Program Recording (TAPE B only)

42
This unit can only use tape for the normal position (Type I).
CD Program recording is not possible for VCD, DVD discs.
Preparation
See "Preparation" on page 40.
1
Select reverse mode
MAIN UNIT
REVERSE MODE
2
Select tape transport direction, then
press the STOP ( 7 ) key.
TAPE B
MAIN UNIT
2 3
STOP
7
3
Playback a disc, then press the STOP
( 7 ) key.
MAIN UNIT
DVD/CD
STOP
7
4
Edit program
See page 28
REMOTE
SHIFT
5
Press the REC/ARM key
MAIN UNIT
Downloaded from: http://www.usersmanualguide.com/
REMOTE
TAPE B
23
STOP
REMOTE
DVD/CD
6
STOP
DVD PGM
EQ
REC/ARM
Each press sw itches the modes as follow s
·
1 "
2 "
3 "
·
÷ If the tape transport direction is opposite to the desired direction,
press the play key corresponding to this.
Tape direction indicators of
currently selected deck.
" : The recording w ill end and the tape w ill stop at the
end in reverse direction, no matter w hether record-
ing w as started in forw ard direction or in reverse
direction.
" :
In recording mode, this is the same as "
" :
Record stops after having recorded one side of tape.
Lit
XD-DV series (EN/T,M ,X)
".