Kenwood HM-383MD Instruction Manual page 45

3
Check the current play mode of the CD player.
All-track recording
If it is in play mode, stop it.
4
Start recording.
MD O.T.E.
or
If you are operating the main unit, the same effect as
step 4 can be obtained by selecting "REC OPTIONS"
then selecting "CD = MD" or "CD = TAPE".
To interrupt a recording
(Recording and playback will be stopped)
7
stop
Tuning
Mode
TAPE O.T.E.
7
stop
Tuning
Mode
Single-track recording
Select the desired CD track and play it.
÷ When step 4 is performed in the middle of CD play-
back, the current track will be recorded from the begin-
ning.
(To record other tracks, repeat steps 3 and 4 for each
track)
÷ When either the playback of CD or recording of MD or
tape is stopped, the other operation is stopped auto-
matically.
At the end of the recording
MD recorder : Stop.
Cassette deck : Stop is executed after an unre-
corded portion of about 4 sec.
has been produced.
Do not turn power off or apply shock or impact
while "MD WRITING" is displayed. If the power cord
is unplugged before "MD WRITING" disappears, the
recorded or edited data will be lost.
Convenient recording methods
45