Table of Contents
Advertisement
Playback of tape
22
If you load a tape in the cassette deck in advance while the power is off. pressing the TAPE 2 3 key turns
power on automatically and starts the tape playback.
To stop playback
Start playback
0
push open
1
1
TAPE
2 3
To wind tape
at high speed
Selection of TAPE
equalizer (TAPE EQ.)
1. Load a cassette tape.
1 Press the area marked 0 push open to open the cassette
holder.
2 Insert a tape.
3 Press the area marked 0 push open to close the cassette
holder.
Do not use a cassette with more than 90-minute recording time, for the
tape used with such a cassette is very thin and tends to cause troubles
such as entanglement around the pinch roller or cutting of tape.
÷ The tape deck of the unit can play Normal (Type
Metal (Type
÷ Remove tape slack before loading.
2. Start playback.
During playback, the tape running direction changes each time the
key is pressed.
2
2
Reverse mode indication
Transport direction indicators
Transport direction indicators:
Indicates the tape transport direction during playback or recording by lighting
of 2 or 3. This direction is the direction stored in memory when the tape was
last stopped.
Start playback
1
1
To wind tape at high speed
) tapes.
T A P E P L A Y
Tape counter
Playback of tape
To stop playback
2
2
Selection of reverse
mode
), High (Type
Displayed when the deck
is loaded with a tape.
) and
Advertisement
Table of Contents
