Dividing A Track (Divide) - Kenwood HM-383MD Instruction Manual

Hm-383md instruction manual
Table of Contents

Advertisement

60
Dividing a track
The following procedure shows how to divide a track by assigning a track number in the desired position
in the track. For example, by inserting an additional track number before the passage you are specially
fond of, it is easy to skip to there when you play the disc later. After the track number has been divided, the
track numbers after it will be adjusted automatically.
Before starting MD editing, be sure to cancel the program mode by pressing the PGM key in stop mode.
Execute operation in play or pause mode.
1
Play the track to be divided.
2
Select " 3 DIVIDE ?".
1
Play the track to be divided and, when the
position you want to divide it comes,
press the TRACK EDIT key repeatedly until
"3 DIVIDE?" is selected. (Pressing the key in
the middle of playback initiates pause)
TRACK EDIT
2
Set it.
If you do not need preview, press the ENTER
key once and go to step 4.
3
If you need preview.
1
Execute preview.
2
Fine adjust and set the dividing point.
P.CALL
4
¢
(DIVIDE)
SET
SET
\
\
SET
÷ When dividing a track, set the dividing point at more
than 2 seconds after the beginning of the track. A track
may not be able to be divided if one of the divide tracks
would become shorter than about 2 seconds.
Each press switches the operation.
1 "3 DIVIDE
?"
2 "3 COMBINE ?"
3 "3 ERASE
?"
4 "3 MOVE
?"
5 The "MD-EDIT" indicator is turned off
(Cancel MD edit mode)
D I V I D E
0
0 6
< > 0 0 7
Elapsed play time since
the dividing point
÷ To cancel the operation in the middle, press the
TRACK EDIT key any time before step
÷ The preview plays a section of about 2 seconds from
the dividing point repeatedly.
P R E V 2 s +
Elapsed play time since
the dividing point
÷ The dividing point can be fine adjusted in the range in
60 ms (6/100 sec.) steps between steps -31 and +31
(i.e. in the range of about 4 sec.) assuming that the po-
sition where the TRACK EDIT key is "0".
MD Edit Functions
?
?
Number of steps of
fine adjustment of di-
viding point
4
.
+
1
Number of steps of
fine adjustment of
dividing point

Advertisement

Table of Contents
loading

Table of Contents