Table of Contents
Advertisement
58
Erasing a single track
The following procedure shows you how to erase a single track which is being played. After the track has
been erased, the track numbers after it will be adjusted automatically. Be careful in using this operation
for a track may sometimes be unable to be recovered once it has been deleted.
Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode.
Execute operation in play or pause mode.
1
Play the track to be erased.
2
Select " 3 ERASE ?".
1
Press the TRACK EDIT key repeatedly until
"3 ERASE ?" is selected. (Pressing the key
in the middle of playback initiates pause.)
TRACK EDIT
2
Set it.
3
Press the SET key again.
3
Execute the track erasure operation.
4
After editing, eject and remove the mini disc.
The MD editing is established finally at the mo-
ment the MD disc is ejected. To cancel the edit-
ing contents, perform the operation described in
"To delete the edited contents (EDIT CANCEL)"
before ejecting the disc. ˆ
(ERASE)
SET
SET
ENTER
0
MD
Each press switches the operation.
1 "3 DIVIDE
?"
2 "3 COMBINE ?"
3 "3 ERASE
?"
4 "3 MOVE
?"
5 The "MD-EDIT" indicator is turned off
(Cancel MD edit mode)
E R A S E
÷ To cancel the operation in the middle, press the
TRACK EDIT key any time before step
Display after execution
"EDIT NOW" = "COMPLETE !"
(When editing is completed successfully)
"EDIT NOW" = "CAN' T EDIT !"
(When editing is impossible)
M D W R I T I N G
Information is
being written.
Do not turn power off or apply shock or impact while
"MD WRITING" is displayed. If the power cord is un-
plugged before "MD WRITING" disappears, the re-
corded or edited data will be lost.
MD Edit Functions
?
3
.
E J E C T
Mini Disc has
been ejected.
Advertisement
Table of Contents
