Assigning A Title To A Disc Or Track - Kenwood HM-383MD Instruction Manual

62

Assigning a title to a disc or track

When titles are input in discs and tracks, the titles can be displayed when they are played back. The follow-
ing procedure can also be used to modify or erase input titles.
Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode.
Select the MD input.
1
Activate the title input mode.
1
Press the TITLE INPUT key.
TITLE INPUT
2
Select the title (disc title or track title) to be
edited.
4
3
Set the title to be edited.
With an MD track recorded in the "LP2" or
"LP4" recording mode using the stamping
function, "LP:" will be input at the beginning
of the track title.
List of registered symbols (ASCII codes):
! " # $ % & '( ) * + , - . / : ; < = > ` ? @ _ ˆ
Total number of title characters
Up to 1792 characters can be input per disc and up
to 80 characters can be input per track. (In case of
alphanumeric and symbol characters)
A space (blank character) also required the same
amount of data as alphanumeric characters. When
deleting a title, it is not recommended to overwrite
spaces on previous characters but use the (CLEAR/
DELETE) function. ˇ
P.CALL
¢
SET
‹
÷ It takes a while because data should be read out of
the disc.
÷ To cancel the operation in the middle, press the
TITLE INPUT key any time before step
Each press of the 4 or ¢ keys switches the op-
eration.
1 "dISC" :
Disc title *1
2 "001", "002"..... :
3 "ALL ERASE " :
Complete erasure of disc and track
titles
4 "[1]", "[2]", "[3]" :
*1 When step 1 - 1 is performed in stop mode, the dis-
play starts with the disc title.
*2 Each press of the 4 or ¢ key displays a track title
in sequence from "001", "002".... When all track titles
have been displayed, 3 then 4 will be displayed.
When step 1 - 1 is performed in play mode, the display
begins with the information on the track being played.
*3 Each press of the 4 or ¢ key causes the selected
title memo number to blink, after which 1 then 2 will
be displayed.
In case of disc title :
Select "dISC"
÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷
In case of track title :
Select the desired track No.
(The track can also be selected using the numeric
keys.)
÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷
MD Edit Functions
3
.
Track title *2
*3
Title Memo